RCBS Single Stage Shell Holder #34 is a hardened-steel shell holder sized for specific case heads used in reloading. It positions the case precisely in single-stage and turret presses to ensure consistent alignment with the reloading die. The holder is engineered to capture 0.125 inch of the case head to support proper SAAMI headspacing.
Key Specifications
- The material is STEEL for durable service life under reloading press use.
- The designated size/finish is #34 to match the corresponding case head dimensions.
- The holder type is listed as a PRESS SHELL HOLDER intended for single-stage and turret presses.
- The listed dimensions are 0.95 x 1.00 x 2.05 (width x depth x length).
- The recorded height is 0.9500 inches for the component as supplied.
- The recorded width is 1 inch per product attributes.
- The recorded length is 2.0500 inches per product attributes.
- The shell holder captures 0.125 inch of the case head to support proper SAAMI headspacing.
- Compatibility is indicated by the product naming as 6.5x68mm S, 8x68mm S, and .45 Schofield.
This shell holder provides a straightforward, reliable solution for handloaders who require precise case positioning during reloading operations. Its hardened-steel construction and standardized sizing make it a practical component for bench reloading setups where consistent headspace and repeatable alignment are important.
This description was generated with AI and may contain errors. Verify specifications and legal restrictions with the manufacturer before purchase. Provided “as-is” without warranties or guarantees.
